STUART TURNER WHEEL CASTINGS for 2½" Gauge

(NB they were intended for ½" scale)

Pattern No	Proto Dia (ft-ins)	Finished Dia (ins)	No of spokes	Type
X207	6-6 to 6-9	3.250 to 3.375	17	B
X214	5-5 to 5-6	2.688 to 2.812	16	B
X217	4-0 to 4-1	2.000 to 2.062	10	C
X224	7-1 to 7-3	3.562 to 3.812	20	B
X225	7-1 to 7-3	3.562 to 3.812	20	B
X230	3-3 to 3-4	1.625 to 1.812	10	C
X231	4-11 to 5-0	2.437 to 2.500	14	B
X232	4-11 to 5-0	2.437 to 2.500	14	B
X233	3-10 to 4-1	1.938 to 2.062	12	C
X234	5-0 to 5-1	2.500 to 2.562	14	B
X238	2-9 to 3-0	1.375 to 1.500	10	C
X242	2-11 to 3-0	1.437 to 1.500	disc	-
X246	2-8 to 2-9	1.375	12	C
X247	6-2 to 6-3	3.062 to 3.125	18	B
X248	6-2 to 6-3	3.062 to 3.125	18	B
X249	3-9 to 3-10	1.875 to 1.938	10	B
X251	3-8 to 3-9	1.875	12	C
X252	3-8 to 3-9	1.875	10	C
X253	3-9 to 3-10	1.875 to 1.938	12	B
X254	3-9 to 3-10	1.875 to 1.938	12	A
X255	3-4	1.688	disc	-
X265	4-2 to 4-3	2.125 to 2.182	10	C

• Type A (balance weight adjacent and angled to crank pin) for inside drivers
• Type B (balance weight opposite crank pin) for outside drivers and coupleds
• Type C (no balance weights) for bogies and tenders
• Nos X225, X231 and X247 are outside coupled
• Nos X224, X232 and X248 are outside drivers with heavier balance weights

back to castings